Description
Elektra 01168035 Heating Element Gasket / Oring
This gasket (01168035) / O-ring is for the connection of the boiler flange to the bottom of the boiler plate on the Elektra Microcasa Leva & Semiautomatica espresso machine models. It creates the seal on the bottom of the boiler to the heating element flange.
Please read the Terms & Conditions before ordering this part or any other part on our website.
Terms & Conditions
Purchasing Parts
- Parts are non-returnable and non-refundable unless damaged in transit. Exchanges for parts “damaged in transit” are applicable so long as:
- You must report the damage(s) to 1st-line within the first five business days of delivery receipt.
- Pictures of the original box and part(s) are provided.
- Damages made by the customer or the customer’s authorized/hired repair person from improper handling or installation are the customer’s responsibility.
- Neither manufacturer nor 1st-line Equipment provides any warranty or guarantee on parts.
- The customer agrees to waive all rights, where applicable by law, for all claims such as:
- Not as described.
- Defective merchandise.
- Not fit for the intended use.
- No longer fit for the intended use.
- Incorrect merchandise received.
- Please note we store parts in bins and they can arrive with cosmetic imperfections (ie scratches, nicks, etc).
- Although we try our best to recommend the proper parts, clients agree to pay for return shipping charges for parts, including cases where errors are made in recommendations and ONLY whereby exceptions are made allowable by 1st-line Equipment, LLC in writing and with a Return Authorization (RA) Number.
Support for Parts
- Parts purchases do not include any technical support in any form and/or instructions in any form.
- DUE TO THE NATURE AND COMPLEXITY OF EQUIPMENT AND NOMENCLATURE USED TO DESCRIBE PARTS, THERE IS NO PERSON AVAILABLE AT 1ST-LINE CAPABLE AND KNOWLEDGEABLE ABOUT THE 50,000+ DIFFERENT PARTS FOR ALL ESPRESSO MACHINES AND GRINDERS. BASED ON THIS, 1ST-LINE PERSONNEL IS NOT ABLE TO OFFER ANY PARTS ASSISTANCE VIA PHONE.
- The purpose of the email request is to allow us time to research the part. This also creates a paper trail in case of any mistakes or necessary clarification. We find this process works well and increases customer satisfaction since fewer mistakes are being made.
Parts Descriptions
- Although we make our best effort to describe parts, please don’t assume a part will fit your machine. Some models have different versions with different parts. If you are unsure of which part to order, please use our contact page with your make and model of machine for assistance. Although we can’t guarantee a part will fit because we do not have the machine in front of us, we will make our best effort to assist via email.
- Please note that manufacturers will source and supply parts different from the original equipment. Although we make our best effort to describe parts, changes can occur by the manufacturer without any notice to 1st-line or to you. For example, a manufacturer may initially supply 110-volt heating elements with 1200 watts but later change to 1300 or 1400 watts without notice. Another example is that an initial parts replacement may have a Parker branded solenoid valve, but subsequent shipments may have Lucifer or ODE solenoids without notice. 1st-line Equipment will NOT be held responsible for any changes in the part supply, nor advertising in these types of discrepancies.
Please visit one of the links below for more Elektra products & information.
Reviews
There are no reviews yet.