Ulka Pump – 52W, 120V, 60Hz, Model EA Type EAP5, plastic output

Description

Ulka Pump Model EA Type EAP5

The optional male fitting that threads onto the output end should have some thread seal tape or Loctite with NSF approval to make a good seal.

This ulka pump is interchangeable with the same brand and style pump that is 41 watts.

This pump and the brass compatible can be found on the following makes of espresso machines:

• Ascaso, Ala di Vittoria, Bezzera, Didiesse, Faema, Gaggia, Grimac, Isomac, la Nuova Era, La Pavoni, La Spaziale, Magister, Nuova Simonelli, Pasquini, Philips/Saeco, Quickmill, Rancilio, Rocket,

• Reference Part Numbers. This pump may be a suitable replacement for the following part numbers:
  Lelit – MC006
  Nemox – 068000141
  VBM – POMPVIBDOM120
  Astoria 26315
  Brasilia 00607.4.00.08
  Carimali 95.00835.00.17
  Ceme 1.01.305.05/PA and 10130505PA
  Gaggia 12000131 and 187720955
  Rancilio 34011023 and 34-011-023
  Saeco 12000131, 187720955, 9070.035.00F, and 996530007751

Specifications:

• 52 watts.
• 120 volts.
• 60 hertz.

Notes:

1. PLEASE MAKE SURE TO CHECK YOUR ESPRESSO MACHINE PRIOR TO PURCHASING THE REPLACEMENT PUMP.
2. Sometimes, a vibration pump will develop an airpocket in shipping or from storage. To remove the airpocket, use a turkey baste filled with water and push the water through the pump while powered on / operating. Make sure the other end is clear and drained, or connected within machine AND air can escape the other side (through open grouphead valve, steam valve open, etc).