Lelit PLA2206 Dark Walnut Flow Control Kit

Description

Lelit PLA2206 Dark Walnut Flow Control Kit

This flow control kit (PLA2206) is for the Lelit Mara X espresso machine models.

Please note that Lelit confirms this item fits the Lelit Mara. However, they can not confirm it fits E61 groupheads found on other machines. Lelit has confirmed that other machines can have a slightly different E61 grouphead. This item is considered a part, and not an accessory.

It is confirmed this paddle kit will not work on Vibiemme E61 groupheads due to the different structure of the top of their E61.

Please note the following to avoid damage to your grouphead:

From the top of your grouphead, the gicleur can be removed usually with an 8mm socket and socket wrench. Upon installation, needle nose pliers can be used to start the installation of the new gicleur. Otherwise, place a little white masking tape on the inside of the 8mm socket to hold the gicleur in place.

WARNING!!!! Upon installation, only hand tighten the gicleur. If you use a socket wrench, there is a 99% likelihood that the gicleur will break inside the grouphead and can be difficult to remove.

If you have success or not on your E61, please write your review to make other customers aware. In your review please note your machine manufacturer and model.

PDCFK01WLW0ZXX1